Scherrer V6 UHF TX-PRO RC Long Range 433-444 Mhz 0.5-2W NEW V6 march 12!!!

Product Information

(this product needs class 2 package post shipment!!
please select this with checkout!)




Scherrer V6 433mhz Long Range UHF system (TX-PRO version)
march  2012

Bottom an top level is 433,05 - 434,79mhz

Kit include:
One transmitter in aluminium CNC case, 6-20V input
One antenna with BNC for TX
(NO RECEIVER!)

Set comes standard without a militairy spec cable
please order the one you like to use seperate!

the new V6 offer better look and feel and easier mounting with 4 flanges with holes,
better cooling for 2W continious, and better shielding.
Please look at the normal TX V5 for technical specifications, user guide and manual is the same.
Both PRO cases are designed and made in U.S.A. by Eddie Weeks "Weeks Aero Concepts, LLC"

This RC control system is specially designed for RC model planes that need extreamly long
range and safety, like: FPV/UAV, large models, and expensive models.

The TX unit samples PPM frames from a normal RC TX unit, with up to 4-12 servo information's,
and encode this digitally with a complicated checksum The receiver part decode it and|
generate up to 12 servo pulses, this gives a jitter free system known from all PCM systems.
At the same time this system uses frequency hopping (FHSS), makes it virtually imune to jamming,
and the ultra fast diversity removes all dark-holes when the angle of the plane to the
transmitter changes.

*** Now using 4 layer special burried via PCB for better cooling, mounting and grounding.
Possibility for more output power: constantly if needed, improved boosters available ***


OPTIONAL:
-Receiver with DIVERSITY!!! whit 2 antennas and LNA Low Noise Amplifier
-Multi frequency hopping system.
-Reception of signal without delays, 50Hz
-Low Frequency that 869 Mhz, reason why is obtained more distance
-Cheaper price

   

TRANSMITTER V6:
This new V6 design have less loss, higher efficiency, and possibility for much more output power:
Safety ! fly using the low power setting, and in case loss of signal activate the powerup feature.
The unit is shipped with a 3 way switch so the user can fast and easy change the level while flying,
0.5W / 1W / 2W power out. The transmitter board is 45x68mm.
RF Power output: 0.5W or 1W or 2W ,the 2W setting can now be used as long as you like. use selectable
Supply Voltage : 6-25V using internal switchmode converter also included inside the nice aluminium
Supply current : depends on input voltage, but input power is 3 times RF out power
Spurs :< 60dB and 80dB under carrier, improved new double low pass filter
Temperature range: -40C to +70C tested

  

(optional) RECEIVER 12Ch V.6  Feb 2012:
- Improved input filter, now even better attenuation for 900 - 1300 - 2400 video transmitters,
virtually impossible to jamm. - The receiver board is 34 mm width, 53mm long, (8mm longer
when angled connector option as shown) 12mm height, weight: 19.4 gr.
- Receiver 12ch with DIVERSITY ! and LNA Low Noise Amplifier, uptimized input filter so it can co-exist
with strong 2.4Ghz on board video transmitters.
- Two MCX connector coax dipole wire antennas come with each RX this type, weight 5.4 gr each.
- The extra pin in ch 12 connector is rssi out, it is now buffered so loading of the RSSI out is uncritical,
1k ohm Zout, It is also filtered to avoid less jumpy OSD readings - ch 12 connector is also ppm out
when < 12ch are used PPM out is the same as sum-signal and this is offcourse fully compatible
with mikrocopter controller board, all RX types and models have this.
- Extra pin in ch 12 connector is rssi out
Sensitivity: -113dBm to -114dBm IMPROVED NEW LNA with less noise factor
- Input voltage range: 4-6V (rx uses 134mA at 5V)
- Servo signal pulse output: 3.3V positive
- Radio chip voltage 2.5V
- Radio band: 433 & 444Mhz multi band and multi frequency hopping system.
- Temperature range: -40C to +70C tested

 
INCLUDED:
- 500 mW /  2 Watt Transmitter V6 built in regulator
- Transmitter antenna

Optional:
Connector cable Futaba
Connector Cable Graupner / MultiPlex
Connector Cable bare 3 wire


You can follow any discussion or technical information
and questions abouth this product on RCgroups.com



Notice: The use and operation of this product in Europe and other countries may require an
amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility
of the purchaser to ensure that the use of this product meets the requirements imposed by your
government’s rules and regulations for RF devices. Do not purchase this product if you are unsure
of the government requirements or are not able to comply with them.

  Estore Rotterdam cannot be held responsible for your actions if you purchase
and/or use this product in violation of your government's regulations.




 

(Based on 2 Reviews)

• Tell a Friend
• Read customer reviews
• Write review / comment

Product Code: ScherrerV6UHFTX-PRORCLongRange433-444Mhz05-2WNEWV5oct11

Price: €214.00