RCL5412-E Electronic HEAD/LANDING Lights - White [5MM, 14"]

Product Information

RCL5412-E Electronic HEAD/LANDING Lights - White [5MM, 14"]

Use RCL5412E to add 2 white headlights to any 1:12 to 1:8 size R/C car or truck with 1 extra
constant LED channel for adding an additional headlight. RPS switch is included for turning
the headlights on/off from a 3rd channel on the RX.
RPS has a set of spare output pins for switching up to 6 LEDs using #5499.

OR

Use RCL5412E to install 2 white landing lights to any 28" span R/C airplane or
helicopter (or dock lights for boats) with 1 extra constant LED channel for adding
an additional landing light. RPS switch is included for turning the landing lights
on/off from a 3rd channel on the RX. RPS has a set of spare output pins for
switching up to 6 LEDs using #5491. Use wire extensions for larger scale craft..

Powered directly from the RX or optional battery source

To change headlight / landing light colors use 5mm or 3mm LEDs.

Everything needed for a complete installation is included with every lighting system!

    

- BRIGHTEST LEDs INDUSTRY WIDE
- SIMPLE & EASY INSTALLATION
- POWERS DIRECTLY FROM THE RX
- ALL MOUNTING HARDWARE INCLUDED
- FAST BODY REMOVAL
- LIFETIME WARRANTY ON EVERY LED

    

Includes:

Replacement nr:
Instructionset                                 -                                                             
                      (1) RX Direct2LED™                      #5075             LED CONTROLLER                                      
(1) remote power switch                #5073             REMOTE POWER SWITCH   
(2) 14" wire extensions                   #5390-14       WIRE LENGTHS                       
  (2) 5mm white headlights            #5290-W         LED SIZES & COLORS           
  (6) standard 5mm LED holders    #5082             INSTALLATION HARDWARE 
(2) 2P connector housings                 -                                                                     
(1) 3.75"x3" aluminum tape           #5080             INSTALLATION HARDWARE
       (4) zip ties & bases                          #5080             INSTALLATION HARDWARE       

      

Specifications:

    SYSTEM CURRENT DRAW (@6V): 45mA
(A standard servo draws approx. 350mA)

RX Direct2LED™
INPUT VOLTAGE: 3.6 - 7.4V [6V Optimal]
TYP OUTPUT CURRENT (per LED channel): 20-30mA

Remote Power Switch
INPUT VOLTAGE: 4.8-6.0V
MAX OUTPUT CURRENT: 1.2A

Blue, Green, White, White Strobe, Red Strobe LEDs
FORWARD VOLTAGE: 3.2V
MAX CURRENT: 30mA

Amber, Red LEDs
FORWARD VOLTAGE: 1.9V
MAX CURRENT: 30mA

    


All system components are guaranteed against manufacturer defect for 2 TWO Years after the
original date of purchase except the LEDS.  Warranty does not cover damage due to powering the
LED beyond specified ratings. Warranty does not cover damage due to an incorrect installation.
Warranty does not cover normal wear, abuse, neglect, or any damage arising as a result of
improper use or modification

 

Be the first to review this product!

• Tell a Friend
• Write review / comment

Product Code: 813487010628

Price: €36.00