Your Shopping Basket () €0.00 ex-VAT (€0.00 inc-VAT)

ImmersionRC EzUHF TX including free 4ch UHF RX


Product Code: IRC-EZUHF-TX
Condition: New

Manufacturer: ImmersionRC

Stock Level: 3

Product Information

Earn Reward Points: 78

Earn Discount: €1.40

ImmersionRC EzUHF Transmitter
including FREE UHF 4ch receiver !!

The Immersion EzUHF Transmitter Offers reliable long-range FPV / UAV control model
with an output of up to 600mW.
Over one year of development, testing and
refinement was invested in the EzUHF line of products.

Robust FHSS link
The robust FHSS (Frequency Hopping, Spread Spectrum) link hops to a new
frequency every 22ms.
This Increases the robustness of the link, and
makes it immune to most sources of interference.

A GFSK (Gaussian Frequency Shift Keying) modulation scheme Reduces
unwanted harmonics, normally present with traditional FSK modulation.

Power Boost Switch
A transmitter mounted switch controls the power level, allo wing
an additional boost to get out of trouble.

USB Port
A standard Mini-A USB port Provides a connection to a PC for firmware upgrades,
and system diagnostics and configuration.
There is no external hardware
required for firmware updating.

Head Tracker Compatibility
Twin 4-pin Mini-Din connectors providence the connection to the R / C transmitter,
and usefull to a compatible head-tracker.
One radios which did not previously
support head tracking can now be used.

With its flexible power source options, and PPM wide input range,
the EzUHF Tx is compatible with most R / C transmitters available on the market today.

A standard DC power jack Allows power to be oversupplied directly to the module
useful in remote mounting applications, where long cable runs May be required.

The EzUHF transmitter requires a license to operate in most countries.
In the US, or the EU, an Amateur Radio license is required when using above
500mw output setting.

• Reliable Link FHSS (Frequency Hopping, Spread Spectrum)
• 433MHz / 70cm Ham band operation
• GFSK modulation
• 600mW (~ 28dBm) output power
• Direct head-tracker input, adding head-tracker compatibility to most radios
• Power switch, ability to boost power When at long range
• Standard SMA antenna connector compatibility with 70cm antennas
• Flexible buffered, AC-coupled, PPM input Ensures compatibility with 3.3V ~ 9.6V PPM levels
• Standard USB port (Mini-A) for firmware upgrades, and system configuration
• Single push button learning or failsafe positions
• Binding function, bond-which Allows Single Tx> Rx, Tx Multi> Rx and Tx Single> Multi Rx
• Works with 8-channel and 4-channel receivers EzUHF
• Power sourced directly from the R / C transmitter (Futaba style) or optional DC power jack
• Built in receiver for future expansion
• Custom extruded brushed aluminum enclosure


Power Requirements:
9 ~ 12V DC 250mA @ 12V 600mW mode, 85mA @ 12V 200mW fashion


Weight: 118g

Content of the package:
1 x EzUHF Transmitter
1x EzUHF 4ch receiver
1 x Futaba cable


EzUHF manual

Notice: The use and operation of this product in Europe and other countries may require an
amateur/ham radio license, and some countries may forbid its use entirely. It is the responsibility
of the purchaser to ensure that the use of this product meets the requirements imposed by your
government’s rules and regulations for RF devices. Do not purchase this product if you are unsure
of the government requirements or are not able to comply with them.

  Estore International cannot be held responsible for your actions if you purchase
and/or use this product in violation of your government's regulations.



Customer Reviews

This product hasn't been reviewed yet. Write a review


 CopyRight Righthere Innovations (2007 - 2024)