Your Shopping Basket () €0.00 ex-VAT (€0.00 inc-VAT)

STROBON Cree® Standalone


Product Code: stroboncree
Condition: New

Manufacturer: FlyTron

Product Information

Earn Reward Points: 13

Earn Discount: €0.26

 This product is compatible with latest FAA and CAA anti-collision lights rules
for drones.
It's visible from 3 miles or 5km away at night.

Strobon Cree® Standalone is the brightest solution for enclosed navigation
strobe drones like DJI Phantom, DJI Inspire, 3DR Solo, Walkera and others.

No cabling required.Just attact it to your drone or model airplane with your
favorite glue or Velcro, press the button to turn it ON.
That's all.

2+ hours continuous operation with onboard battery.
Powerful Standalone LED Cree®
No Cabling required
Easy to use single button interface.
On board battery status and charge indicator system.
Compatible with all 5V Micro USB cables and chargers. (Cable not included)
Contact pads (L + and L-) for the external LED support.
Battery with internal overcharge and discharge protection.

Colour Selection

Because of human eye's limitations, HAS Every color different visibility and
energy transfer rate.
Also everytime HAS LED color different chemical
compounds and effciency.
According our experience in years;

WHITE: The best visibility and efficienty.
RED: 2th in the visibility, efficiency is same as white but the best for warning.
GREEN: 3th in the visibility and efficiency.Best for Standard
RED / GREEN (Left / Right) navigation usage.

BLUE: 4th in visibility and usefull efficiency.We are not Suggesting this
color for warning or navigation but special usage.

Bottom line: White and Red is the best option if you need long-range visible strobes.
And you can use the green to identify your flying platform direction.
Blue is only for special applications.

BATTERY STATUS: Press the button then release to learn battery status
When it is OFF.    
(1 blink: Need Charge, 2 blink: It's OK,
three blink: Fully Charged)

ON / OFF: Press and hold the button for three seconds to turn ON or OFF

CHARGE: plug it to any micro-USB charger or computer port When charging is required.
- The LED will blink with very short bursts When charging.
- The LED will blink with 1 second ON / OFF pattern 2 seconds When the battery
is fully charged.    
It takes two hours for empty batteries.

The battery includes it's own PCM module.This module Protects the
battery from overcharge and discharge for long lifespan.
If there's no life
sign on the circuit When you press the button, probably discharge protection activated
HAS Because of low battery voltage.
Just charge it to a turn-on.

Dimensions: 20mm x 16mm x 8mm
Weight: 4g
Current Consumption: <30mA per hour
Charge Port: MicroUSB
Charge Current: 40mA max.
Charge Time: ~ 2 hours
Battery Type: LiPo battery 70mA with safe and reliable PCM circuit.


Customer Reviews

This product hasn't been reviewed yet. Write a review


 CopyRight Righthere Innovations (2007 - 2021)