• Home
• Electronics
• Navigation, neon & Led systems
• EL wire neon
• El drivers & inverters
• Driver for up to 5m EL Wire (Water Resistant)

Earn Reward Points: 5

Earn Discount: €0.09

This is a super adaptable EL Driver which will run up to 5 meters
or EL wire or 150squ cm or EL Tape or Panel

It DOES NOT have a blinking function - but comes with the option of an
On / Off plunger switch.The switch will latch on when fully pressed down,
press for a second time and the switch will latch off.

As explained in detail below, these Adaptable Drivers are very versatile with
a whole selection of Power inputs (Mains, Batteries, Direct 12V etc)

It has two integral screw fixing points on both sides of it

plus it has a water-tight seal all around it including where the wires come
in and out of it.Attached in a sensible place it should be withstand all
types of weather

Its dimensions are: 28mm X 18mm X 24mm (LxWxH)
the screw fixing tabs stick out 6mm each on the 29mm side
and could easily be cut off if space is vital
Weight: 25g
 
EL Driver Options:
This EL Driver comes with an On / Off switch.
Without a switch it will draw power when it is connected to a power source

Or It has an Trigger Switch on the end of a 1.2metre cable.
For portable uses, this allows the unit to be held on the body.
For other uses, it allows the driver to be mounted somewhere pretty
far from the switch

 This Driver has a range of power inputs that cover most potential uses,
please choose one of these from the drop-down menu:

1) ONLY THE DRIVER



12v small adaptable driver

Maybe you have your own 12V 5.5mm / 2.1mm input you want to use,
perhaps you will be using one of the 2-way power splitters, or will you be
cutting off the connector and using the bare wires?

Whatever your reason, this option gives you just the driver (as in the pic above)
- without any external power connectors like the rest of these listed below ...

2) Crocodile Clips

Perfect if you already have your own 12V battery to run this driver

 3) 8x AA Battery Box

This 8xAA Battery Box will plug straight into the driver.
It is fairly large (126mm X 72mm X 18mm) but will make this EL Driver portable

 4) 3 x 18650 Rechargeable Battery Box

This 3 x 18650 Rechargeable Battery Box will plug straight into the driver.
It is fairly large (63mm X 58mm X 30mm) and the leads for the output
are 15cm long but this makes EL Driver portable.

5) Mains Powered
mains PSU for EL Wire

This handy PSU can be used to make this EL Driver powered off or Mains
Electricity (UK, US or Euro plugs are available)

 6) Car Lighter Adapter



This adapter plugs into the car lighter socket.It is fused and ends with
a 5.5mm / 2.1mm jack plug so it can be used with any of our 12v Drivers
or accessories

7) 2 way Splitter for 12V Power Input (5.5mm)
2 to 1 splitter for 12v 2.1mm 5.5mm adapter

If you're thinking of running two of these units off of one power source,
then get yourself one of these splitters.

Please note that this is a Battery Pack for 2 x Drivers.

Most people also use Splitters that come from the Driver to the EL Wire
(so you only need 1 x Driver for many EL Wires)

 
Remote Control:
12v remote control

you can use this Remote Control Unit by connecting the Controller
between the Power Source and the Driver

You can use several different controllers with just one hand-held remote
unit if you want to switch several different drivers at once

The Remote Control Unit is not available on the drop-down options above

* All the EL wire we supply comes with a connector,
so they plug straight into the driver *