A50-12L Turnado V3 - Glider

The new V3 Turnado Glider version integrates seamlessly into our
program for sailors nose drives / FES.Through the shaft extension with
the built-supporting bearing This drive can be block in slim glider nose.
 
- Easily movable shaft by removing the three rear M3 screws.
The model can be converted back to the sailors in the shortest time.
E-flight and glider towing possible alternates.
- Is based on the 1000-fold proven Hacker A50-Turnado
- Free shaft with 6mm diameter, for the use of the common Propmitnehmern
and Scale spinners
 
Scope of application:
 
Glider nose drive / FES:
- Perfect as a nose drive to start on its own chassis with small propellers.
- For sailors to ~ 11kg: 6S Lipo, RFM 13x10, Master Mezon 120 lite
(Current consumption ~ 60-65A in flight)
- For sailors to ~ 12kg: 6S LiPo, RFM 14x10, Master Mezon 120 lite
(current consumption 70-75A in flight)
 
Technical data of the motor:
(Overall dimensions see picture above)

No-load current at 8.4V 1.2A
Internal resistance 0.019 Ohm
Idle speed per volt 450 U / min-1
weight 445g
Outside diameter 51.5 mm
Length 61 mm
Number of poles 10
Regulators Recommendation 80A-130A Brushless
Rec.Timing 20 ° -25 °
Shaft diameter 6 mm (internal 8mm)
M4 threaded mounting hole, 25 / 30mm
 

Write Review