Earn Reward Points: 471
Earn Discount: €8.48
The hacker R & D team around the developer Martin Vilsmeier has once again achieved a big hit with this new Q80-11 PSD!
Especially for the new requirements in the F3A aerobatics this Q80-11 PSD was developed in close cooperation with our team pilots.
The "P" stands for "Performance" by an uncompromising revision has succeeded in further improving the weight-performance ratio. The overall length has shrunk to the size of the Q80-XS.
Also the internal resistance has been reduced again which makes the whole drive more efficient and increases the possible power throughput.
Like every Q80 also this Q80-11 PSD is built, tested and measured by hand in-house.
Quality "Made in Germany" for the highest demands.
Power range | max. 3200W (15 sec.) |
---|---|
Idle Current @ 8.4V | 1.1A |
Resistance (Ri) | 0.02 Ohm |
RPM/Volt (kv) | 205 U/min-1 |
Weight | 620g |
Outer diameter | 88.5mm |
Length | 65.5mm |
Number of poles | 28 |
Controller recommondation | MasterSpin 99 Opto |
Timing recommondation | 25° |
Switching frequency | 8kHz |
Prop | Xoar CFK 21x13 | Mejzlik 20x14EL 3Bl. | Falcon 20x13,5 3Bl. |
---|---|---|---|
V / LiPo | 37V = 10S LiPo | 37V = 10S LiPo | 37V = 10S LiPo |
Amp. | 74A | 89A | 84A |
Power | 2738W | 3293W | 3108W |
RPM | 6150 | 5910 | 6030 |
Controller | Master Spin 99-Opto | Master Spin 99-Opto | Master Spin 99-Opto |
Timing | 25° | 25° | 25° |