• Home
• Electronics
• Chargers & connectors
• Chargers
• IMAX B8 charger

Earn Reward Points: 61

Earn Discount: €1.10

X B8 charger

Genuine product with holograpic seal!   NO INFERIOR FAKE!

iMAX B8 provides most convenient balance charge port for Lithium batteries, the universal connector,
pitch 2.54mm, XH compatible for Align, Kokam / Robbe packs from 2 cells to 8 cells.
 
Optimized user interface
When charging or discharging, B8 has an 'AUTO' function that sets the feeding current
automatically.Fault Especially for Lithium batteries, it can preventDefault the overcharging
that can lead to an explosion in by user's.Every program in the unit is controlled with mutual
links and communication for every possible error for maximum safety.These can be set at
user's option.It provides most convenient balance charge port for Lithium batteries,
the universal connector, pitch 2.54mm, XH compatible for Align, Kokam / Graupner / Robbe
packs from 2 cells to 8 cells

 Maximum Safety
Delta-peak sensitivity: The automatic charge termination program works on the

principle of the Delta-peak voltage detection.
Auto-charge current limit: When charging NiCd or NiMH at "AUTO" current mode,
you can set the upper limit of charge current to avoid from high current charging.
This is very useful when charging the low impedance and small capacity NiMH battery in
"AUTO" mode.Capacity limit: The charging capacity always calculated by multiple of the charging
current and time.If the charging capacity Exceeds the limit the process will be terminated
automatically when you set the maximum value.

Temperature Limit: The temperature of the battery on charging will rise by its internal chemical reaction.
If you set the limit of temperature the process will be expired forcibly when the limit has reached.
Processing Time Limit: You can also restrain the maximum defect process time to prevent
from any possible.

Input power monitor: To protect the car battery using as input power from being damaged the voltage
of it always monitored.If it drops below the lower limit the process will be ended automatically.

 High-power and high-performance circuit
B8 Employs the circuit that has maximum output power of 150W.As a result it can charge
or discharge up to 27 cells of NiCd / NiMH and 8 series of Lithium batteries with maximum current of 7.0A.
Furthermore the cooling system is so efficient that can hold such a power without any trouble of
running the CPU or the operating program.

 Maximum Power Circuit Chart
The actual amount of feeding to the battery charge current is automatically limited to be 150 watts,
so not to exceed the charger's maximum rated charging power.The maximum discharge
power is approximately 25 Watts.The discharge current delivered to the charger's internal
charger is limited by thermal sensor for maximum discharge current.If the internal temperature
over 80 Celsius, the charger will be cut off and "OVER TEMP ERR" will show on the LCD.
In this case, please decrease discharge current.

 Individual voltage balance for Lithium batteries inside
B8 has an individual-cell-voltage balancer inside.
This does not require any extra balancer when charging Lithium batteries
(Lilo / LiPo / LiFe) for cell voltage balancing.

 Balance individual cells on discharge
B8 also can monitor and balance individual cells of the Lithium battery pack during
the discharge process.If the voltage of one cell varies abnormally nay,
the process will be stopped with the error message.

 Suitable for various types of lithium batteries

B8 can accept three types of lithium batteries-Lilo, LiPo and LiFe.They have different characteristics by their chemistry.
You can select any one of them that you are going to

process before the job.For their specifications, refer "Warning and safety notes" section.

 Lithium battery 'Fast' and 'Storage' mode
You can charge Lithium battery for special purposes.'Fast' charge reduces the charging time of
Lithium battery and 'Storage' mode controls the final voltage of the battery to be suit for long time storage.

Data Store / Load
For users convenience it can store maximum 10 data of different batteries.You Can Establish the
data contains program setting of the battery to charge or discharge continually.
These data can be called out at any time you need and the process can be executed
without program setting.

 Cyclic charging / discharging
Perform 1 to 5 cycles of charge?Charge or discharge?
Continually charge for battery refreshing and balancing.

 PC based analysis using USB communication

For technical expert, B8 offers PC based program can analysis the characteristic of the
battery by USB port It shows a graph of voltage, current, capacity and temperature

curves.It also shows the individual voltage of each cell in the lithium battery pack.

Specifications:
Operating voltage range: DC 10-18V
Circuit power: Max 150W
Charge current range: 0.1-7.0A
Discharge current range: 0.1-5.0A
Current drain for balancing Li-po: 300mA/cell
NiCd / NiMH battery cell count: 1-27cells
Lithium battery cell count: 1-8cells
Pb battery voltage: 2-36V
Net weight: 550g
Dimension: 174x113.3x37mm


Note to our customers:
Please note that many inferior imitations of the IMAX
chargersare sold.
We source directly from the manufacturers of the company SKYRC.
All our chargers are provided with a holographic seal and a serial
number series, this they can unlock on the homepage of SKYRC.
To get a high quality original product.
Of course, with manufacturer's warranty.