2 Way Video Splitter (3-18v)

A high quality and very tiny video splitter for the diversity transmitters
or parallel ground screens and recorders.

This 2 channel video splitter-which will allow you to share the signal from one
single camera to 2 different transmitters.

for example;
you can use 1200 and 800MHz transmitters sametime for diversity receivers.
Or you can use it on your ground station for splitting the video to VDR,
goggles or maybe a second display for your friends.

You can supply your camera and transmitter on notes 3 pin servo type connectors
(1A max), the 3 wires are GND, Vsupply, Video Signal.

Important !!!
+ The trace is a pass-through, meaning That All three devices are connected
to it through the red wire in the middle of the servo cable.
In case any of your devices Operates on a different voltage,
you shouldering remove the red wire from That connector.

Specifications

supply Voltage
3.3 - 18 volts (on 3 parallel ports)

video System
75 ohms with SAG correction

operating Temperature
-40 To +105 ° C

Current Consumption
30mA

Video input voltage: 75R
1.0Vp-p

Dimensions (L X W X H)
3mm X 18mm X 28mm

Weight
2.0 grams


 

Write Review